|
AUTO CONE SETTING
The AUTO CONE can unlock, adjust one-half inch and relock in thirty
seconds-done under full crushing load without stopping. The adjusting
threads have hydraulic pressure during adjustment to eliminate thread
chatter.
DIGITAL CRUSHER SETTING
CEC AUTO CONE shows you the exact cone setting in inches, tenths and
hundredths. You can zero out crusher liner wear periodically as needed.
It only takes a few minutes. CEC hydraulic systems provide positive
measuring to the digital read out.
AMP DRAW
Adjust the material in-feed, the crusher setting and cavity depth to
reach full amp draw. This results in maximum crusher output. Everything
is monitored from the operator's station UNDER FULL LOAD. No stopping
to make adjustments.
CAVITY DEPTH
CEC provides a digital display of the crusher rock level in the cone
crusher cavity. This allows the operator to choke feed the cone and
maintain the choke feed without fear of rising over the top. The operator
has a graphic chart and a digital read out in inches.
AUTO CONES IN MANY SIZES
- 400 Series
Std
- 450 Series
Std-SH
- 510 Series
Std-SH
|
- 600 Series
Std
- 600 Series
SH
- 520 Series
Sand Cone
|
TONS PER HOUR (optional)
The AUTO CONE can be equipped with an optional belt scale to provide
continuous monitoring of the tons per hour of in-feed or out-feed. The
digital display for this information is read on the control station.
VIDEO TRAINING
CEC and their dealers provide operator startup and training. A training
video is also provided with each AUTO CONE. Operators are using the
AUTO CONE features and increasing production substantially at the end
of the very first day!
AUTO CONE MECHANICS
CEC AUTO CONES have a new and improved eccentric action. This change
of stroke is matched to a newly designed cavity. The manganese cone
liners are computer designed and improve material flow. The design also
reduces manganese cupping that occurs with wear. Throughput is increased
and horsepower per ton is reduced.
|
